NT™ Flow Viscosity, Density and Temperature Correction Webtool

Use the following form to determine your corrected 4 and 20 mA signal output values. If you know your specific gravity and viscosity, fill in the box below. If you don't know your specific gravity and viscosity, use the options to the right to determine these values.   [Reset Form]

Step 1. Specify your desired specific gravity, viscosity and temperature below.

Specific Gravity:
Viscosity: (cP)
Temperature: °C

Don't know your specific gravity or viscosity?

1a. Select from common fluids...
 
1b. Mix a custom blend of fluids...
 

Step 2. Enter the flow range-fitting size code printed on the product label, or enter the desired flow rate and tube fitting.

Flow Range-Fitting Size Code:
- OR -
Desired Flow Rate:

Tube Fitting Size Code:

Fitting and Range Sizes
Code Tube Size and Type
F02    1/4" Flaretek® tube fitting
F03    3/8" Flaretek® tube fitting
F04    1/2" Flaretek® tube fitting
F06    3/4" Flaretek® tube fitting
F08    1" Flaretek® tube fitting
W02    1⁄4” Super 300 Type Pillar® tube fitting
W03    3⁄8” Super 300 Type Pillar® tube fitting
W04    1⁄2” Super 300 Type Pillar® tube fitting
W06    3⁄4” Super 300 Type Pillar® tube fitting
W08    1” Super 300 Type Pillar® tube fitting
Code Flow Range
TL 0 - 15 ml/min.
TT 0 - 25 ml/min.
T0 0 - 50 ml/min.
T1 0 - 125 ml/min.
T2 0 - 250 ml/min.
T3 0 - 500 ml/min.
T4 0 - 1250 ml/min.
T5 0 - 2500 ml/min.
T6 0 - 5000 ml/min.
T7 0 - 10000 ml/min.
T8 0 - 20000 ml/min.
T9 0 - 40000 ml/min.
T10 0 - 60000 ml/min.
T11 0 - 90000 ml/min.
T12 0 - 120000 ml/min.
For other fitting types, use same tube size.

Step 3. Click the "Submit" button to view the corrected 4 and 20 mA signal output values.

Warning: Chemicals listed in this web tool can by themselves or in combination result in great harm or death. Entegris makes this tool available only as a method of estimating densities and viscosities of mixtures of materials at various temperatures. NO ENDORSEMENT OF SAFETY OF ANY COMBINATION OF MATERIALS IS IMPLIED. It is entirely up to the user to determine the safe methods and conditions under which chemicals can be used.